VERSAKRIMP PARALLEL SPLICE 6 GA

Molex Versakrimp Parallel Splice 6 GA — Motorsport Wire Crimp Splice Connector

The Molex Versakrimp Parallel Splice 6 GA (19205-0006) is a pre-insulated crimp splice connector for joining or branching 6 GA wire circuits in motorsport wiring harnesses. With a conductor cross-section range of approximately 13.3 mm², this splice is designed for high-current main power feeds, alternator output wiring, and primary chassis current distribution. The Versakrimp design produces a gas-tight, mechanically secure crimp joint when used with the correct crimp tool and die, providing the reliability expected in a race car wiring harness.

Why Use Crimp Splices in Motorsport

A correctly executed crimp deforms the connector barrel around both wire conductors to create a cold-welded gas-tight joint that resists vibration fatigue, oxidation, and resistance increase over time. Soldered joints are susceptible to vibration cracking at the solder-conductor boundary — a known motorsport failure mode that makes crimp splices the professional standard for harness construction and repair.

6 GA Gauge — Application Detail

6 GA parallel splices are used for the highest current circuits outside of direct cable-lug connections. Applications include main battery distribution wiring, large alternator output feeds, and primary earth bars where a reliable splice joint is needed in very heavy cable runs.

Correct Tooling

Versakrimp parallel splices require a ratchet crimp tool with the appropriate die for the wire gauge range. An undersized or oversized die produces an improperly formed crimp that may pass visual inspection but fail under vibration or load. Arctic Performance Parts can advise on the correct Molex crimp tool specification for each gauge range.

Available from Arctic Performance Parts

Molex Versakrimp parallel splices are stocked in individual gauge packs and the 595-piece MLX-SPLICE-KIT multi-gauge assortment. Supporting professional harness builders and motorsport workshops across Norway, Sweden, and Denmark with 1–2 week lead time for quantities beyond current stock.