M22759/32-20-38 ORANGE/GRAY BTF STRIPE

Name: M22759/32-20-38 ORANGE/GRAY BTF STRIPE - Arctic Performance Parts
SKU: M22759/32-20-38-PRSP
Price: 0.93 USD
Availability: BackOrder

1$ Ink VAT

M22759/32 Tefzel Wire — 20 AWG, Orange/Gray Stripe The M22759/32-20-38 Orange/Gray BTF Stripe — SKU: M22759/32-20-38-PRSP is a genuine MIL-spec M22759/32 dual-wall Tefzel-insulated stranded wire in 20 AWG with a…

Available on backorder

Delivery time 7-14 days.

M22759/32 Tefzel Wire — 20 AWG, Orange/Gray Stripe

The M22759/32-20-38 Orange/Gray BTF Stripe — SKU: M22759/32-20-38-PRSP is a genuine MIL-spec M22759/32 dual-wall Tefzel-insulated stranded wire in 20 AWG with a orange/gray striped insulation, supplied by Arctic Performance Parts as a pre-striped BTF (Build To Fill) shelf stock wire for professional motorsport wiring harness construction. M22759/32 is the heavier-wall variant of the Tefzel wire family, engineered for motorsport power and mixed-function wiring where enhanced mechanical insulation protection is required alongside the full chemical and thermal resistance of Tefzel.

M22759/32 — Dual-Wall Tefzel

Where M22759/16 uses a single thin-wall ETFE construction optimised for lightweight signal wiring, M22759/32 applies a heavier dual-wall Tefzel insulation that withstands greater mechanical stress — abrasion against chassis edges, cut-through under grommet compression, and sustained contact with adjacent components in a tightly routed harness. Both variants share the same ETFE chemistry, retaining the 150°C continuous temperature rating, exceptional fuel and oil resistance, and chemical stability of the full Tefzel wire family. The thicker wall of M22759/32 extends service life in the more demanding routing environments associated with power and actuator circuit wiring in race cars.

Orange/Gray — Colour Code 38

Orange/gray (code 38) at 20 AWG M22759/32 identifies shield drain conductors for shielded orange-family auxiliary circuit cables — the gray base marking the drain or screen function while the orange stripe cross-references the drain to the orange auxiliary sub-system circuit whose cable shield it terminates. Shielded actuator control cables and position sensor leads in orange-family auxiliary circuits at 20 AWG — where EMI suppression is required for noise-sensitive control signals — need their drain conductors visually linked to the orange circuit family they screen. Orange/gray in dual-wall M22759/32 ensures these drain conductors are distinguishable from active circuit conductors and reach their correct single-point earth connection during harness assembly, supporting correct shielding performance throughout the vehicle’s service life.

20 AWG — Gauge Selection

20 AWG M22759/32 occupies the intermediate wiring tier between lightweight signal gauges and heavier power wiring — used for moderately loaded actuator feeds, switched control outputs, sensor supply circuits requiring more current than signal-gauge wiring can carry, and mixed-function conductors where the dual-wall Tefzel construction provides added insulation robustness for routing through demanding environments in a race car chassis and engine bay. The stranded tin-plated copper conductor provides the flexibility and vibration fatigue resistance essential for motorsport harness routing through bends, grommet passes, and chassis runs that mixed-function wiring must navigate in a professionally built race car harness.

BTF Shelf Stock — Ready to Ship

The PRSP designation confirms this wire is held as pre-striped shelf stock at Arctic Performance Parts, available for immediate dispatch without the lead time of a custom stripe run. Professional harness builders working to tight build schedules can order the orange/gray colour combination and receive it promptly. Arctic Performance Parts stocks a comprehensive range of M22759/32 striped colours across standard motorsport wiring gauges.