M22759/32-20-36 ORANGE/BLUE BTF STRIPE

Name: M22759/32-20-36 ORANGE/BLUE BTF STRIPE - Arctic Performance Parts
SKU: M22759/32-20-36-PRSP
Price: 1.09 USD
Availability: BackOrder

1$ Ink VAT

M22759/32 Tefzel Wire — 20 AWG, Orange/Blue Stripe The M22759/32-20-36 Orange/Blue BTF Stripe — SKU: M22759/32-20-36-PRSP is a genuine MIL-spec M22759/32 dual-wall Tefzel-insulated stranded wire in 20 AWG with a…

Available on backorder

Delivery time 7-14 days.

M22759/32 Tefzel Wire — 20 AWG, Orange/Blue Stripe

The M22759/32-20-36 Orange/Blue BTF Stripe — SKU: M22759/32-20-36-PRSP is a genuine MIL-spec M22759/32 dual-wall Tefzel-insulated stranded wire in 20 AWG with a orange/blue striped insulation, supplied by Arctic Performance Parts as a pre-striped BTF (Build To Fill) shelf stock wire for professional motorsport wiring harness construction. M22759/32 is the heavier-wall variant of the Tefzel wire family, engineered for motorsport power and mixed-function wiring where enhanced mechanical insulation protection is required alongside the full chemical and thermal resistance of Tefzel.

M22759/32 — Dual-Wall Tefzel

Where M22759/16 uses a single thin-wall ETFE construction optimised for lightweight signal wiring, M22759/32 applies a heavier dual-wall Tefzel insulation that withstands greater mechanical stress — abrasion against chassis edges, cut-through under grommet compression, and sustained contact with adjacent components in a tightly routed harness. Both variants share the same ETFE chemistry, retaining the 150°C continuous temperature rating, exceptional fuel and oil resistance, and chemical stability of the full Tefzel wire family. The thicker wall of M22759/32 extends service life in the more demanding routing environments associated with power and actuator circuit wiring in race cars.

Orange/Blue — Colour Code 36

Orange/blue (code 36) at 20 AWG M22759/32 identifies CAN bus and data interface conductors within the orange auxiliary power circuit family — used when an orange-family sub-system includes a dedicated communication conductor that must be individually identified alongside the primary orange power and control wires. Auxiliary control modules with integrated CAN bus interfaces — active suspension controllers, gearshift solenoid control units, and auxiliary fuel management modules — route their communication conductors alongside their 20 AWG orange-family power wiring. Orange/blue in M22759/32 gives these communication conductors a colour identity that bridges both their circuit family (orange) and their data function (blue), making the harness architecture immediately readable to any technician familiar with the colour coding convention.

20 AWG — Gauge Selection

20 AWG M22759/32 occupies the intermediate wiring tier between lightweight signal gauges and heavier power wiring — used for moderately loaded actuator feeds, switched control outputs, sensor supply circuits requiring more current than signal-gauge wiring can carry, and mixed-function conductors where the dual-wall Tefzel construction provides added insulation robustness for routing through demanding environments in a race car chassis and engine bay. The stranded tin-plated copper conductor provides the flexibility and vibration fatigue resistance essential for motorsport harness routing through bends, grommet passes, and chassis runs that mixed-function wiring must navigate in a professionally built race car harness.

BTF Shelf Stock — Ready to Ship

The PRSP designation confirms this wire is held as pre-striped shelf stock at Arctic Performance Parts, available for immediate dispatch without the lead time of a custom stripe run. Professional harness builders working to tight build schedules can order the orange/blue colour combination and receive it promptly. Arctic Performance Parts stocks a comprehensive range of M22759/32 striped colours across standard motorsport wiring gauges.