M22759/16-22-62 BLUE/RED BTF STRIPE

M22759/16 Tefzel Wire — 22 AWG, Blue/Red Stripe

The M22759/16-22-62 Blue/Red BTF Stripe — SKU: M22759/16-22-62-PRSP is a genuine MIL-spec M22759/16 Tefzel-insulated stranded wire in 22 AWG with a blue/red striped insulation, supplied by Arctic Performance Parts as a pre-striped BTF (Build To Fill) shelf stock wire for professional motorsport wiring harness construction. M22759/16 is the aerospace and motorsport industry standard wire specification for high-temperature, lightweight, and chemically resistant wiring in demanding electrical environments.

M22759/16 — MIL-Spec Tefzel

M22759/16 uses ETFE (Ethylene Tetrafluoroethylene) insulation — the DuPont Tefzel formulation — providing continuous operation at up to 150°C, exceptional resistance to fuels, oils, hydraulic fluids, and solvents, and excellent abrasion resistance in a thin-wall construction that minimises conductor diameter and harness weight. These properties make M22759/16 the default wire for professional motorsport harness builders who require maximum reliability in race engine bays, cockpit wiring, and chassis loom applications.

Blue/Red — Colour Code 62

Blue/red (code 62) at 22 AWG identifies power supply conductors within the blue communication circuit family — the red stripe marking the supply or positive function of a conductor that belongs to the blue data and communication group, such as a bus power supply or module supply feed routed alongside the communication conductors. CAN bus and communication modules require a power supply alongside the data conductors. Using blue/red for the module supply wire — where the blue base identifies the circuit as belonging to the communication system and the red stripe marks it as the supply conductor — keeps the harness coding self-consistent and avoids the need for a disconnected red wire in an otherwise blue-family sub-harness section.

22 AWG — Gauge Selection

22 AWG is the lightest standard gauge in the M22759/16 Tefzel range for motorsport harness signal wiring — the preferred choice for thermocouple extension leads, fine analogue sensor inputs, data acquisition channels, and low-current logic circuits where minimising harness weight and diameter is a primary design objective. 22 AWG Tefzel wire saves meaningful weight over heavier gauges in high-channel-count data acquisition and telemetry harnesses without compromising signal integrity or Tefzel’s exceptional insulation performance. The stranded tin-plated copper conductor provides the flexibility and vibration fatigue resistance essential for motorsport harness routing around tight bends, through grommets, and along chassis runs subject to flex during vehicle operation.

BTF Shelf Stock — Ready to Ship

The PRSP designation confirms this wire is held as pre-striped shelf stock at Arctic Performance Parts, available for immediate dispatch. Professional harness builders working to tight build schedules can order the blue/red colour combination without waiting for a custom stripe run — a critical advantage when a specific colour is needed to complete a build on deadline. Arctic Performance Parts maintains a comprehensive range of M22759/16 striped colours across all standard AWG gauges to support professional harness construction.

Technical Specifications — SKU M22759/16-22-62-PRSP

• Specification: MIL-DTL-22759/16
• Insulation: ETFE (Tefzel)
• Wire gauge: 22 AWG
• Colour: Blue/Red stripe (code 62)
• Temperature rating: −65°C to +150°C continuous
• Construction: Stranded, tin-plated copper
• Chemical resistance: Fuel, oil, hydraulic fluid, solvents
• Application: Motorsport wiring harness, data acquisition, aerospace, high-performance builds
• Stock type: BTF pre-striped shelf stock