Hi-Temp Ring Terminal — 16–14 AWG / 1/4″
The Hi-Temp Ring Terminal 16-14 AWG 1/4 Stud — SKU: 9910 is a high-temperature rated ring terminal for 16–14 AWG wire, built for motorsport and performance automotive wiring where standard PVC-insulated ring terminals fail under heat exposure. The hi-temp construction maintains crimp retention, insulation integrity, and contact stability at the elevated temperatures found in race engine bays, exhaust-adjacent routing, and firewall termination points.
Why Hi-Temp Terminals Matter
Standard ring terminals use PVC insulation that softens above approximately 80–90°C. In a race engine bay, temperatures near exhaust manifolds, turbocharger housings, and cylinder heads regularly exceed this threshold. PVC at these locations shrinks, cracks, and eventually exposes bare conductors — creating short-circuit and fire risks. Hi-temp ring terminals use higher-grade insulation that maintains physical form and electrical isolation through the full thermal cycle of competitive motorsport use.
16–14 AWG — Gauge Selection
16–14 AWG is the workhorse range for motorsport power and actuator wiring — relay outputs, fuel pump switched feeds, fan control, and solenoid actuator circuits all commonly run in this gauge. The 9910 crimp barrel is sized precisely for 16–14 AWG conductor cross-section, ensuring full compression across the wire bundle for maximum mechanical and electrical joint quality.
1/4″ Stud — Fixing Size
The 1/4″ stud is the most common fixing size for automotive grounding points, relay panel terminals, and compact distribution blocks. Always confirm the stud or screw diameter at the target connection point before ordering to ensure the correct hole size is specified.
Motorsport Applications
Relay coil connections, switched power outputs, ECU injector and coil ground returns, and mid-current sensor power supplies at 1/4″ stud earth points. Arctic Performance Parts stocks the full range of hi-temp ring terminal sizes covering all common motorsport gauge and fixing combinations.
Technical Specifications — SKU 9910
- Terminal type: Ring / eyelet
- Wire gauge: 16–14 AWG
- Stud / screw size: 1/4″
- Insulation: High-temperature rated
- Termination: Crimp
- Application: Motorsport engine bay, high-heat terminations, chassis earth points
- Category: Ring Terminals
Reviews
There are no reviews yet.