AS,66 WAY,INLINE,PIN,D KEY,GREEN

Deutsch Autosport AS 66-Way Inline — Pin (Male) — Green Key (D)

The Deutsch Autosport AS 66-Way Inline Pin (Male) Connector with Green (D) Keying Insert — SKU: AS118-35PD is a professional MIL-spec-grade Deutsch Autosport AS series inline connector for very high-density full ECU main harness separable joins and complete multi-circuit race car loom interfaces in race cars and high-performance vehicles across Norway, Sweden, and Denmark. Configured as an inline separable join — both halves are free, cable-mounted connectors within the wire run, creating a separable interface at any intermediate point in the harness without requiring a panel or bulkhead mounting point.

Deutsch Autosport AS 66-Way — Series Design and Circuit Count

The Deutsch Autosport AS series is the standard circular connector format for professional motorsport wiring — featuring an aluminium alloy shell machined to MIL-spec tolerances, gold-plated contact interfaces for low-resistance long-term electrical performance, and a positive push-pull locking mechanism that stays secure under sustained race vibration and rapid connector cycling at service intervals. The 66-way AS inline delivers near-maximum circuit density for complete ECU main harness and PDM system separable joins in the most complex professional race car loom builds. At 66 circuits, a single inline connector pair can carry virtually the entire electronic circuit count of a high-specification race car across one harness separation point. The 66-circuit inline provides very high circuit density for full race car loom separable joins — minimising connector count at complex harness separation points in professional motorsport builds.

Pin (Male) — 66-Circuit Contact Array

This listing is the pin half of the 66-way AS inline pair. Sixty-six gold-plated pin contacts carry sixty-six individual circuits simultaneously — delivering very high circuit density across a single inline separable join in the most complex professional race car loom builds. The corresponding socket half of the same circuit count and key colour is required to complete the mated connector pair — both halves must be ordered to form a functional inline separable join. AS contacts are ordered separately; select the correct contact part number for your wire gauge and current requirements.

Green Key (D) — The fourth keying position in the deutsch as system

Green D is the fourth and final colour in the Deutsch AS keying system — assigned to the fourth 66-circuit AS inline connector pair when a harness separation point carries four parallel bundles of 66 circuits each. With Yellow A, Blue B, Orange C, and Green D all assigned at the same separation point, four physically identical 66-way AS inline connectors can be fully separated and reconnected without any possibility of cross-mating — regardless of how quickly or under what conditions the reconnection takes place. This four-key arrangement is reserved for the most elaborate full race car loom builds in professional motorsport across Norway, Sweden, and Denmark, where maximum circuit density at a single separation point drives the use of four parallel high-circuit-count connector pairs.

Inline Configuration — Flexible Harness Separation Without a Fixed Mount

The AS inline configuration places the separable join within the harness run itself — neither connector half is fixed to a panel or chassis surface. This makes it the preferred choice for engine-to-chassis harness separation points, subframe and removable component harness joins, and any separable interface along the wire run where flexible placement is required. The inline format is widely used across professional race car loom builds in Norway, Sweden, and Denmark for its placement flexibility and its clean, balanced appearance when both halves are routed through the same harness trunk or loom sleeve.

Technical Specifications

• Series: Deutsch Autosport AS
• Circuits: 66-way
• Configuration: Inline
• Contact type: Pin (Male)
• Key colour: Green (Key D)
• Shell material: Aluminium alloy
• Operating temperature: -65°C to +175°C
• Locking: Push-pull positive lock
• Typical application: The fourth separable join in a complex loom where four connectors of the same circuit count are required