AS,22 WAY,PLG,SKT,D KEY,GREEN

Deutsch Autosport AS 22-Way Plug — Socket (Female) — Green Key (D)

The Deutsch Autosport AS 22-Way Plug Socket (Female) Connector with Green (D) Keying Insert — SKU: AS612-35PD is a professional MIL-spec-grade Deutsch Autosport AS series connector for medium-high-density ECU sub-harness connectors, PDM wiring interfaces, and complex multi-circuit motorsport loom separable joins in race cars and high-performance vehicles across Norway, Sweden, and Denmark. Configured as a free, cable-mounted plug half that mates with a fixed flange or inline receptacle — the movable, harness-side component that disconnects for component removal, harness separation, and servicing.

Deutsch Autosport AS 22-Way — 22-circuit Circuit Configuration

The Deutsch Autosport AS series is the professional standard circular connector format for motorsport wiring — aluminium alloy shell, gold-plated contacts, positive push-pull locking, and full MIL-spec environmental sealing for race-condition reliability. The 22-circuit configuration is used for ECU sub-loom joins, PDM input/output harness interfaces, and complex multi-circuit race car loom separation points including engine-to-chassis harness splits in professional motorsport builds throughout Scandinavia. Well-established 22-circuit mid-high-density shell — widely specified for ecu sub-loom and pdm harness separable joins in professional motorsport.

Socket (Female) — 22-Circuit Contact Array

This is the socket half of the 22-way AS plug pair. Twenty-two socket contacts receive twenty-two individual pin contacts — the receptacle half completing the full medium-high-density circuit complement. The corresponding pin half of the same circuit count and key colour completes the mated pair — both halves are required. AS contacts are ordered separately; select the correct contact part number for your wire gauge and current requirements.

Green Key (D) — Keying Position and Mis-Mate Prevention

Green D is the fourth and final key assignment in the Deutsch AS keying system — allocated when four 22-circuit AS plug connectors are required at the same separation point. With Yellow A, Blue B, Orange C, and Green D assigned across four pairs, four physically identical 22-circuit AS connectors can operate at the same separation point with complete mis-mate prevention under all conditions — including the fast-paced, high-pressure connector operations of a race event service environment. Four-key arrangements represent the maximum keying complexity in the Deutsch AS system and are reserved for the most elaborate full race car loom builds in professional motorsport across Norway, Sweden, and Denmark, where maximum circuit density at a single primary separation point drives the use of four parallel 22-circuit connector pairs.

Plug Configuration — The Movable Cable-Mounted Connector Half

The AS plug is the free, cable-mounted half of the connector pair — it does not mount to a panel or chassis surface. The plug travels with the removable component or sub-harness and mates into a fixed receptacle (flange-mounted or inline) to complete the electrical circuit when the assembly is connected. This makes the plug the correct specification for engine-side harness connectors that must be disconnected for engine removal, dashboard harness sub-connectors that follow a removable dashboard assembly, removable subframe harness joins, and any other separable point where one connector half must be freely movable with a removable vehicle component.

The 22-circuit AS plug is used for medium-high-density ECU sub-harness connectors, PDM wiring interfaces, and complex multi-circuit motorsport loom separable joins across race cars and performance vehicles in Norway, Sweden, and Denmark. The plug’s free, unmounted format allows the harness builder to route the cable bundle freely from the removable component to the mating point without any chassis mounting constraint — then mate the plug directly into the fixed receptacle when the component is installed. The push-pull positive locking mechanism provides secure, vibration-resistant engagement that holds through race conditions while allowing intentional disconnection at every service interval.

Technical Specifications

• Series: Deutsch Autosport AS
• Circuits: 22-way
• Configuration: Plug
• Contact type: Socket (Female)
• Key colour: Green (Key D)
• Shell material: Aluminium alloy
• Operating temperature: -65°C to +175°C
• Locking: Push-pull positive lock
• Typical application: Fourth connector at a separation point — completes the full four-key set in the deutsch as keying system