Deutsch Autosport AS014 — 19-Way Flange Pin (Male) — Green Key (D)
The Deutsch Autosport 19-Way Flange Pin (Male) Connector — Green Key (D) — SKU: AS014-19PD is a genuine MIL-spec-grade Deutsch Autosport AS series panel-mounted connector built for 19-circuit ECU sub-harness separation points on complex mid-to-high density race car looms in professional race cars, hillclimb, rally, and high-performance builds across Norway, Sweden, and Denmark. Configured as a flange-mount (panel/bulkhead) separable join, this connector is fixed to a chassis panel, firewall, or bulkhead surface via its integral mounting flange — delivering a clean, reliable, mechanically keyed separable interface at the harness separation point.
AS014 Shell — Series Architecture and Circuit Density
The AS014 is a compact circular flange-mount shell offering a range of circuit counts from 12 to 37 ways — covering sub-harness ECU interfaces, sensor cluster bulkhead joins, and primary loom separation points on mid-complexity race car builds. The AS014 shell delivers MIL-spec aluminium alloy construction, gold-plated contacts, and positive push-pull locking in a compact panel-mountable body. The 19-circuit configuration in the AS014 shell is suited to 19-circuit ECU sub-harness separation points on complex mid-to-high density race car looms. Typical applications at this circuit count include ECU sub-harness separation points carrying a primary auxiliary channel group, combined signal and ground distribution joins, high-density sensor interface points, and engine-to-chassis loom separation joins. The 19-way flange is a high-density circuit count used for ECU sub-harness and primary loom separation in demanding race car wiring builds.
Pin (Male) — 19-Circuit Contact Array
This listing supplies the pin half of the 19-way AS flange connector pair — gold-plated pin contacts 19 in total — carrying each circuit across the flange-mount (panel/bulkhead) separation point. To form a complete functional connector pair, the matching Socket (Female) half of the same circuit count, shell size, and key colour must be ordered separately; both halves are required to create a mated, functional separable join. AS series contacts are ordered independently of the connector shells — select the correct contact part number for your wire gauge, current rating, and preferred termination method.
Green Key (D) — Keying Position and Mis-Mate Protection
Green D is the fourth and final standard key colour in the Deutsch Autosport AS keying system — reserved for the fourth 19-circuit AS flange bundle when maximum circuit density at a single separation point demands four parallel pairs. With Yellow A, Blue B, and Orange C already assigned to the first three bundles, Green D completes a four-key, fully protected connector arrangement. No pair can be mated to any other, regardless of how quickly the reconnection must be made. This four-key arrangement represents the maximum mis-mate protection achievable at a single separation point in the AS system. The full four-key scheme — Yellow A, Blue B, Orange C, Green D — is used by professional motorsport loom builders across Norway, Sweden, and Denmark only on the most complex full race car builds where four parallel 19-circuit AS flange bundles are required at the same separation point.
Flange Configuration — Panel and Bulkhead Mounting
The AS flange connector mounts through a panel cutout using its integral aluminium mounting flange — fixing one half of the connector pair permanently to the chassis, firewall, or bulkhead surface. The mating free half (the cable-mounted opposite half) plugs directly into the panel-mounted half, creating a secure separable interface at the bulkhead itself. This configuration is used wherever the harness must separate cleanly at a fixed chassis point — engine bay to cabin firewall, removable subframe to chassis, fuel cell bay to main loom, or any other fixed panel location where one side of the harness needs a permanent, precision-located connection point. Flange connectors are the professional standard for primary chassis separation points in full race car loom builds. Flange-mount AS connectors are the standard choice for primary chassis and bulkhead separation points on race cars and high-performance vehicles built and maintained by loom specialists and motorsport workshops across Norway, Sweden, and Denmark.
Technical Specifications — AS014-19PD
- Series: Deutsch Autosport AS
- Shell size: AS014
- Circuit count: 19-way
- Configuration: Flange (flange-mount (panel/bulkhead))
- Contact type: Pin (Male)
- Key colour: Green (Key D)
- Shell material: Aluminium alloy, MIL-spec machined
- Contact plating: Gold over nickel
- Operating temperature: −65°C to +175°C
- Locking mechanism: Push-pull positive lock collar
- Contacts: Ordered separately — not included
- Mating half required: Socket (Female), same circuit count, shell size, and key colour
Reviews
There are no reviews yet.